Mountain Bike MTB
The frame hawk light is the maximum of our current production, as the best materials are used (high modulus carbon) and the best technology (bandage) in order that made an absolutely tailor-made.
The bandage is made of sealed chamber, in absolute the absence of oxygen, the situation that precludes any blowing (presence of air between the bandage) so as to obtain a frame with rigidity and torsional resistance equal to a monocoque but with the advantage of having a custom size.
The frame hawk light is available also in “integrated seat”, with BB30 bottom bracket and rear triangle with carbon dropouts with quick coupling.
Our hands They can forge its craftsmanship and art and technology, the frame that will create a real gem with two wheels for your and our passions.
For the realization of a customized bicycle there are several phases, the first is the study of body size.
For a ergonomic frame, exactly dimensioned, as is done in tailoring, we find the shares anthropometric (height, horse, torso, arms , shoulders) and work out with a specific software.
Then we analyze the measures most suitable geometric and use to create custom frames in carbon fiber.
- Category: MTB
- Chassis / Sardinia (Italy)
- Weight Chassis / Frame Weight: Kg. 1,210 / 1,150 Kg
- Steering / Steering: Conical / Conic 1 “1/8 Top 1” 1/2 Bottom
Mov. C.le / BB: BB30
Disc Brakes / Disk Brakes with rear post mountain
Cables Step Inside / Internal Cables - Fork / Fork:
- Measures / Measures:
- Options: The frame 29ER is produced exclusively tailored.
- Delivery included
MEASUREMENTS
Delivering a custom frame is a little ‘how to pack a suit to the tailor, even if it’s oversized and unbalanced, does not allow the rider to make the most of their potential and can also cause physical problems. To achieve an ergonomic frame must considereare a number of factors: anthropometric characteristics, pedaling and biomechanics. We study them and measure them, then we analyze the geometry and the most appropriate use to “wrap” the handmade carbon fiber frame, gem two wheels for your and our passions.
MEASUREMENT OF THE HORSE – CAV
The subject must be in good standing position, with his back and shoulders back to a vertical wall, in shorts, barefoot and slightly apart.
SIZE ARM – B
The subject must hold a cylinder having the same diameter of the handlebar and tighten the horizontal arm while keeping your shoulders from the wall.
TRUNK SIZE – T
The subject should be sitting on a stool with his back straight as well as support the pelvis and the back against a vertical wall.
MEASUREMENT OF THE THIGH – C
The subject is seated.
The tibia must be kept vertical and the horizontal leg, place an auction at the ball ends and measure the dimension between the wall and the rod.
MEASUREMENT OF TIBIA – G
The subject is seated; the portion to be detected must be between the floor and the rod resting on the knees of the subject at the top ledge of the kneecaps.
ANTHROPOMETRIC MEASURES
We note the shares anthropometric and work out with specific software, with full attention to what must be the end use. The following is the Placement test.
PLACEMENT TEST
The test posizinamento runs through a meter that allows us to estimate the power applied to the second position, for seeking a customized posture.
FRAME MEASURES
After carrying out the various anthropometric assessments, postural and positioning, we are able to provide the best geometry, useful for making the frame in carbon fiber, carbon with the “HMCF-HC”.
NOTES
We must pay special attention to the measurements of the Horse and the Trunk. In calculating the size of the frame, these two measures have in fact the greatest “weight”.