Mountain Bike MTB

The frame hawk light is the maximum of our current production, as the best materials are used (high modulus carbon) and the best technology (bandage) in order that made ​​an absolutely tailor-made.
The bandage is made ​​of sealed chamber, in absolute the absence of oxygen, the situation that precludes any blowing (presence of air between the bandage) so as to obtain a frame with rigidity and torsional resistance equal to a monocoque but with the advantage of having a custom size.
The frame hawk light is available also in “integrated seat”, with BB30 bottom bracket and rear triangle with carbon dropouts with quick coupling.

Our hands They can forge its craftsmanship and art and technology, the frame that will create a real gem with two wheels for your and our passions.

For the realization of a customized bicycle there are several phases, the first is the study of body size.
For a ergonomic frame, exactly dimensioned, as is done in tailoring, we find the shares anthropometric (height, horse, torso, arms , shoulders) and work out with a specific software.
Then we analyze the measures most suitable geometric and use to create custom frames in carbon fiber.

 

  • Category: MTB
  • Chassis / Sardinia (Italy)
  • Weight Chassis / Frame Weight: Kg. 1,210 / 1,150 Kg
  • Steering / Steering: Conical / Conic 1 “1/8 Top 1” 1/2 Bottom
    Mov. C.le / BB: BB30
    Disc Brakes / Disk Brakes with rear post mountain
    Cables Step Inside / Internal Cables
  • Fork / Fork:
  • Measures / Measures:
  • Options: The frame 29ER is produced exclusively tailored.
  • Delivery included

MEASUREMENTS

Delivering a custom frame is a little ‘how to pack a suit to the tailor, even if it’s oversized and unbalanced, does not allow the rider to make the most of their potential and can also cause physical problems. To achieve an ergonomic frame must considereare a number of factors: anthropometric characteristics, pedaling and biomechanics. We study them and measure them, then we analyze the geometry and the most appropriate use to “wrap” the handmade carbon fiber frame, gem two wheels for your and our passions.

MEASUREMENT OF THE HORSE – CAV

The subject must be in good standing position, with his back and shoulders back to a vertical wall, in shorts, barefoot and slightly apart.

SIZE ARM – B

The subject must hold a cylinder having the same diameter of the handlebar and tighten the horizontal arm while keeping your shoulders from the wall.

TRUNK SIZE – T

The subject should be sitting on a stool with his back straight as well as support the pelvis and the back against a vertical wall.

MEASUREMENT OF THE THIGH – C

The subject is seated.
The tibia must be kept vertical and the horizontal leg, place an auction at the ball ends and measure the dimension between the wall and the rod.

MEASUREMENT OF TIBIA – G

The subject is seated; the portion to be detected must be between the floor and the rod resting on the knees of the subject at the top ledge of the kneecaps.

ANTHROPOMETRIC MEASURES

We note the shares anthropometric and work out with specific software, with full attention to what must be the end use. The following is the Placement test.

PLACEMENT TEST

The test posizinamento runs through a meter that allows us to estimate the power applied to the second position, for seeking a customized posture.

FRAME MEASURES

After carrying out the various anthropometric assessments, postural and positioning, we are able to provide the best geometry, useful for making the frame in carbon fiber, carbon with the “HMCF-HC”.

NOTES

We must pay special attention to the measurements of the Horse and the Trunk. In calculating the size of the frame, these two measures have in fact the greatest “weight”.

Contacts
Measures

Compare

Share this product

Product Description

Greatitaly Mountain Bike

The best frames Made in Italy

The Italy company born in Sardinia in 1975. Since then, with the experience and expertise gained over the years by two generations, builds custom-made bicycles and Mountanin Bike (MTB), pointing to the quality of each piece, thus ensuring greater safety and pleasure of cycling.
Our hands They can forge its craftsmanship and art and technology, the frame that will create a real gem with two wheels for your and our passions.

The Laboratory was founded in 1975 in Quarryville in the province of Cagliari, and two generations forge custom frames. The first were made ​​of steel, then aluminum and carbon fiber, carbon now in the top of the current technology, called “High Modulus Carbon Fiber-Honey Comb” (HMCF-HC), to which are added the best components on the market, but always in the traditional way.
The new office and organization, modern equipment and certified processing methods, enable us to design bicycles that are lighter, more durable and safe Made in Italy.

Since 1975 we forge handicraft chassis, to ensure standards continually higher quality and precision, in order to satisfy the most demanding rider.

For the realization of a customized bicycle and Mountain Bike (MTB) there are several phases, the first is the study of body size.
For a ergonomic frame, exactly dimensioned, as is done in tailoring, we find the shares anthropometric (height, horse, torso, arms , shoulders) and work out with a specific software.
Then we analyze the measures most suitable geometric and use to create custom frames in carbon fiber.

Carbon is a composite material as it is obtained by combining an epoxy resin to a fiber, which can be carbon, Kevlar or glass.
The carbon possesses a structure very resistant but, as with all fibers, to build a piece which has a shape and a substance needs of the resin.
The technology used for the construction of composite polymeric, high-performance, is that of the “prepreg” or the use of long fibers preimpregnated with thermosetting resin epoxy.

The other big advantage of the composite material is that we can arrange the fibers in the direction that we think it is necessary.
A proper design and overlapping layers of tissue properly oriented (rolling) give the structure the mechanical qualities they need.
In products Pistidda are used type fabric Unidirectional fibers crossed at 45 ° and for structural parts, while for the finishing layer (aesthetic) the fibers can be of type UD, 1k, 3k or 12 k.

 Our bycicles and Mountain Bike MTB technology HMCF-HC (HIGH MODULUS CARBON FIBER – HONEY COMB) is currently the top technology on the composite fibers applied to facilities where workloads and performance fee have very high resistances with relatively low weight, which is why this technique is directly derived from aeronautical applications and sports such as F1, sectors that have in common the need to have high performance with the least possible weight.
The tubing made ​​with Honeycomb technology is composed of layers of carbon with a gap of Nomex (material shaped nest bee with Aramid, base material of Kevlar).

Reviews

There are no reviews yet.

Be the first to review “Mountain Bike MTB”

This site uses Akismet to reduce spam. Learn how your comment data is processed.